Anet N4 Firmware V1.65 & AIPrint V1.09 Slicing Software Updates

Please be noted that the firmware and the slicing software need to be updated all together!

Alprint for Windows
Alrpint for Mac

Step Guide of Anet N4 firmware update:

A. Download and copy the firmware update files N4_V1.09.bin on your flash drive.
B. Click “Printing” and select N4_V1.09.bin on the files list.
C. Click print and it would pop up a message “Whether to update firmware?”. Click “Enter”.
D. Wait for update until the firmware information show version V1.65. 


Alf BN - November 9, 2020

I own my N4 since may 2020, printing results are average, sometimes good, otherwise failed.
Prints are often glued to FEP, i calibrate built plate each 2 or 3 prints and my print parametres are 10 bottom layers 99s, normal layers 9s, uplift speed 4mm/s, uplift height 8mm.
In forums, N4 seems to not exist, all posts are about ET series…
I would like to use Chitubox (i use it to generat supports), but i have to slice with Alprint.
What about N4 firmware to directly slice whith Chitubox?

Bruno - October 16, 2020

Please make chitubox compatibile!!!

Regis Freitas - September 4, 2020

Does anyone know any official communication channel of Anet to pass on this complaint? They don’t answer here.

Regis Freitas - September 4, 2020

Alguém conhece algum canal de comunicação oficial da Anet para que repassar essa reclamação? Eles não respondem aqui.

Luis Serrano - August 31, 2020

Please solve the software problem, is a trash and is not possi le to use, I have 2 Formlabs, what a difference

The N4 looks a good printer, but the software is a limitation to sell it, nobody of my clients want to buy the printer


ALEX MIRANDA - August 30, 2020

Dear friends
Please understand that your equipment is losing competitiveness compared to other equipment for not using chitubox. Your slicer is terrible admit it. I bought your printer but I plan to return it for this reason. Please be quick and arrange to use chitubox. In addition, firmware updates don’t seem to have improved things.
Please listen to whoever buys your products.

JORGE REGIS DE FREITAS - August 29, 2020

when I start the program the screen on the right side is all black. Also don’t import the stl after the loading bar reaches 100%.
I bought the printer and I can’t use it because of the software, I will return it if there was no solution

Regis Freitas - August 29, 2020

I don’t understand, why Anet doesn’t solve all your problems by allowing the chitubox to export to .N4?

Gilli Levy - July 30, 2020

The slicer gets stuck when slicing, the program goes “not responding” and the N4 is made in the chosen location but 0kb file (so no file). keeps crashing like this every time :/

Bruno Cabral - July 13, 2020

How about a linux version (appImage is fine) OR to add support on chitubox?

Leave a comment

Comments must be approved before appearing

* Required fields