0.2mm/ 0.3mm/ 0.4mm/ 0.5mm/ 0.6mm Extruder Nozzles - Anet 3D Printer
0.2mm/ 0.3mm/ 0.4mm/ 0.5mm/ 0.6mm Extruder Nozzles - Anet 3D Printer

15pcs Brass 3D Printer Nozzle

Save $6.00
$15.00
$9.00
Size*Quantity

15PCS brass nozzles for 3D printer MK8 extruder head with filament diameter of 1.75 / 3.0mm. Compatible with mainstream printers such as Anet, Creality, Makerbot 3d printers, etc.

 

There are five different sizes of nozzle packs available:

Nozzle aperture: 0.2 / 0.3 / 0.4 / 0.5 / 0.6mm (the standard version is 0.4mm nozzle for most FDM 3d printers)
Screw outer diameter: 6mm

 

Package includes:

15 pcs x nozzles

Shipping from Chinese warehouse.

The picture is for reference only. Please adhere to the original products in case of any mistake.

Related products

  • Mainboard for Anet ET4/ET4 Pro/ET5 3D Printer - Anet 3D Printer
    Mainboard for Anet ET4/ET4 Pro/ET5 3D Printer - Anet 3D Printer
    from $69.00

    Mainboard for Anet ET4/ET4 Pro/ET5 3D Printer

    Motherboard Mainboard for Anet ET4X / ET4 / ET4 Pro / ET5X / ET5 / ET5 Pro Printer. · The 32 bit high-speed ARM chip is used as the main control ch...

    View full details
  • Extruder Head Kits for Anet ET4 / ET5 3D Printer - Anet 3D Printer
    Extruder Head Kits for Anet ET4 / ET5 3D Printer - Anet 3D Printer
    $38.00

    Extruder Head Kits for Anet ET4 / ET5 3D Printer

    3D printer extruder head for Anet ET4, ET4X, ET4 Pro, ET5, ET5X or ET5 Pro 3D printers. The nozzle is 0.4mm standard one that suitable for printing...

    View full details
  • Aluminum Heat Bed for ET4 / ET5 / A8 / A6 / E12 / E16 / A8 Plus /A3 - Anet 3D Printer
    Aluminum Heat Bed for ET4 / ET5 / A8 / A6 / E12 / E16 / A8 Plus /A3 - Anet 3D Printer
    Sale
    from $25.00

    Heat Bed for Anet ET4 / ET5 / A8 / A6 / E12 / E16 / A8 Plus

    24V 220*220*3mm aluminum heat bed for ET4 / ET4X / ET4 Pro. 24V 300*300*3mm aluminum hotbed for Anet ET5X / ET5 / ET5 Pro. 12V 220*220*3mm alumin...

    View full details
  • Pneumatic Connector for ET4 Series Printers - Anet 3D Printer
    Pneumatic Connector for ET4 Series Printers - Anet 3D Printer
    Sold out
    $15.00
    $14.99

    15pcs Pneumatic Connector

    PC4-M6 pneumatic straight fitting connector for MK8 OD 4mm PTFE tube for M6 Feed Fitting Coupler Anet ET4 / ET4X / ET4 Pro, and Anet ET5 / ET5X / E...

    View full details
  • 3PCS Hot End Kit for A8 / ET4 3D Printers
    Anet Hot End Kit for A8 3D Printer - Anet 3D Printer
    Sale
    from $15.00

    3PCS Hot End Kit for A8 / ET4 3D Printers

    Hot end kit for Anet A8, A8 Plus, A6, Anet ET4, Anet ET5X, Anet ET5, ET5 Pro 3D printers suits 1.75mm filament printing. It’s also a replacement pa...

    View full details

Step to step guide to change the nozzle on a 3D printer?

1. Heat the print head on the preheat control panel of your printer to about 200 degrees. 
2. Using a wrench, turn the old nozzle loose from the hotend. and unscrew it from the hotend.
3. You could thread the new nozzle into the hotend with your finger. But you need to be quick, because the nozzle would be heated up quickly. 
4. Using a wrench, tighten the new nozzle into the throat. 
5. Reload filament and ensure it's flowing freely through your new nozzle.