Anet ET Series Display Screen - Anet 3D Printer
Anet ET Series Display Screen - Anet 3D Printer

LCD Screen for Anet ET4 / ET5 3D Printer

Save $6.00
$28.00
$22.00
Model

The Anet ET4 series 3D printers including ET4, ET4X and ET4 Pro use a 2.8” LCD display while the ET5 series including ET5, ET5X and ET5 Pro 3D printer use a 3.5” LCD display.

Please select the right size while purchasing replacements LCD display for your specific Anet 3D printer.

Related products

  • 3D Touch Sensor for Auto Hot Bed Leveling
    3D Touch Sensor for Auto Hot Bed Leveling
    Save $4.00
    $19.00
    $15.00

    3D Touch Sensor for Auto Hot Bed Leveling

    Auto bed leveling sensor for 3D printers. The sensor has higher precision than the normal capacitive leveling sensor. And it could apply to heatbed...

    View full details
  • 3d printer belt
    3d printer belt
    Sale
    from $9.00

    2PCS 3D Printer Belt for ET4 / ET5

    X-axis or Y-axis timing belts for ET4 and ET5 with pressed copper buckles at the belt end.  (2PCS Pack) Compatible with 3D printers: Anet ET4, ET4X...

    View full details
  • 2 Pcs Cooling Blower Turbo Fan DC 24V/12V 4010/5010 Fan - Anet 3D Printer
    2 Pcs Cooling Blower Turbo Fan DC 24V/12V 4010/5010 Fan - Anet 3D Printer
    Save $3.00
    $12.00
    $9.00

    6Pcs Cooling Blower 4010 Fan

    6 Pcs Cooling Blower Turbo Fan DC 24V/12V 4010 Fan Package Included: 4010 blower fan (12V Or 24V) * 6PCS Shipping from the Chinese warehouse. The p...

    View full details
  • PTFE teflon tube with cutter
    PTFE teflon tube with cutter
    $9.00

    8 meters PTFE Bowden Tube with Cutter

    8 meters high-temperature bowden PTFE teflon tube with cutter. There are OD3.8mm and OD4mm two options for 1.75mm filament guiding pie.  OD: 3.8mm...

    View full details
  • Hotend Kit for ET4 Series Printer - Anet 3D Printer
    Hotend Kit for ET4 Series Printer - Anet 3D Printer
    $30.00

    3pcs Hotend Kit for ET4 Series Printers

    Hotend kit with TMP and END cables(heating tube), heating block, heat sink, pneumatic connector Suitable for Anet ET4 / ET4X / ET4 Pro and ET5 / ET...

    View full details

How to change the screen of ET4 series 3D printer

1. Remove the screws of the bottom cover of the printer.
2. Remove the bottom cover, you can see the motherboard.
3. Remove the cables connecting P1and P2 from the motherboard
4. Remove the screen fixing screws
5. Remove the screen
6. Connect the P1, P2 cables to the motherboard. (Pay attention to the corresponding number here, incorrect wiring will cause a black screen ) After changing to a new screen, connect and fix it with screws
7. Connect the other end of the P1 P2 cables to the new screen
8. Fix the screen (Note: Fix the screws diagonally and then tighten them to avoid misalignment)
9. Install the bottom cover, the replacement of the screen is complete.