Anet ET4 Firmware Update ET4 V1.1.2

The firmware update of Anet ET4 (ET4 without capacitive leveling sensor) V1.1.2 has improved from the following places:

・  Format your SD card before updating.
・  Modify  the  filament  retreat  phenomenon  after  refueling  and  back  to  print.
・  Reduce  the  Z-axis  moving  and  acceleration  speed.
・  Shorten  the  trigger  time  for  thermal  runaway  protection.  
・  Add  French  user  interface
・  Limit  the  work  of  the  limit  switch  only  when  homing.
・  Modify  "Load  and  Unload"  translation,
・  The  control  button  works  only  after  homing  or  automatic  leveling  or  manual  leveling  or  homing  compensation  has  been  completed.  The  motor  stops  after  prints  finish.   
 

P.S: If some of you meet with troubles on your machine after firmware update, you can reach there to find solutions: Anet ET4 Firmware Update Guidelines

Download link: ET4 V1.1.2

Check the latest firmware version of Anet ET4, ET5X, ET5 on our blog.