Get Inspired

  • July 2, 2021 Anet 3D

    How To 3D Print Lithophane in Color

    You’re probably pretty good at 3D printing photos, even have made one or two lithophane lamps on your own. Grayscale lithophanes were already pretty amazing, but colors can add more interesting details to them. This article is going to tell...

    Read now
  • June 30, 2021 Anet 3D

    Cura Profile Setting for Lithophane 3D Print

    We talked about how to 3D print pictures as lithophanes in the previous articles and listed a series of matters and attention about lithophane 3D print. In this article, we will introduce you in details of 3D print lithophane. And...

    Read now
  • June 25, 2021 Anet 3D

    Full-Size Mandalorian Helmets on Small 3D Printers

    Wanting for a wearable printed Mandalorian helmet but only have a small 3D printer? Don’t need to worry about the model size. We will show you how to print a full-size Mandalorian helmet with your desktop printer and we will...

    Read now
  • June 22, 2021 Anet 3D

    7 Must-Have Accessories for 3D Printing

    With accelerated growth in development, there are many pretty good printers that reliable and affordable. Such as Anet A8, Anet A8 plus, Anet ET4 series, and Anet ET5X series. However, getting good results from your 3D prints comes from more...

    Read now
  • June 7, 2021 Anet 3D

    How to Set Octopi to Remote 3D Printing

    3D printing a thing, sometimes consumes a lot of days. Leaving a 3D printer printing alone can waste filament because of unexpected printing error, or even lead to safety issues. Using Octopi to run remote 3D printing can be a...

    Read now
  • June 4, 2021 Anet 3D

    Most Functional Anet A8 Upgrades in 2021

    Anet A8 3D printer has been the most popular DIY 3D printer because of its affordable price and good performance. We selected some of the most functional upgrades on our Anet A8 that contributed by Anet community. These upgrades and...

    Read now
  • April 16, 2021 Anet 3D

    Make a Plotter - Write & Draw with Anet ET4X 3D Printer

    Modifying a 3D printer into a plotter is another interesting thing. By replacing the extruder kit with a pen, and converting image into SVG file with Inkscape, STL file with TinkerCAD and finally printable G-code file with Cura, we can write and draw as a pen with the Anet ET4X 3D printer.
    Read now
  • February 1, 2021 Anet 3D

    Top Three 3D Scan Apps for IPhone in 2021

    Now 3D printing is quite popular around the world and then comes the increasing demands for printing what we see around us. And for this reason, 3D scanning technology is also developing fast and becomes more accessible than ever before....

    Read now