A8 Plus SEMI DIY Version User Manual-Installation (Chapter 6)



<1. Use Instruction>

<2. Installation Instruction>

<3. Spare Parts List>

<4. Parameter>

<5. Name of Parts>

<6. Installation>

<7. Machine Function Introduction>


1. Except that the electronic wire shown in step 6 passes through the jack at the upper end of the

mainboard, the remaining electronic wires are all pulled out from the holes under the mainboard, and the machine is connected from below the machine to avoid affecting the operation of the machine.

2. When all wiring is plugged in, please remove the zip ties on the black belt, plug in the power line, turn on the machine for trial operation(please refer 7.2 First Printing ), and then install the mainboard shell after everything is normal.



Previous article A8 Plus SEMI DIY Version User Manual-Machine Function Introduction (Chapter 7)
Next article A8 Plus SEMI DIY Version User Manual-Name of Parts (Chapter 5)

Leave a comment

Comments must be approved before appearing

* Required fields