2Pcs X-axis / Y-axis Belts

Save $3.00
Original Price $15.00
Current Price $12.00

2PCS X-axis or Y-axis Timing Belt (for ET4 and ET5 Series)

Anet 2PCS GT2 Timing Belt+2PCS 16 Teeth Timing Pulley(for A8 Plus)

  • Width: 6 mm
  • Pitch: 2 mm

Compatible with 3D printers: Anet A8, A8 Plus, Anet ET4, ET4X, ET4 Pro, ET5, ET5X, ET5 Pro.

ET4 X-axis belt 799mm
ET4 Y-axis belt 789mm

ET5 X-axis belt 970mm
ET5 Y-axis belt 970mm

Package Included:

2PCS * X-axis belt

Shipping from the Chinese warehouse.

The picture is for reference only. Please adhere to the original products in case of any mistake.

How to Change 3D Printer X-axis & Y-axis Belts

Replace Y-axis Belt on a 3D Printer

 1.  Loosen the Y-axis motor screws with 2.5mm L wrench
 2.  Move the motor inward to loosen the belt
 3.  Pull metal end of the belt out from the slot
 4.  Pull out the other end of the belt
 5.  Take out the belt
 6.  Insert the new belt from the front idler pulley
 7.  Put the metal end into the slot
 8. Circle the belt around the drive gear
 9. Circle the belt around the rear idler pulley
10. Put the other metal end of the belt into the slot
11. Pull the motor outward to fully tighten the belt
12. Tighten the motor mounting screws


Replace X-axis Belt on a 3D Printer

1. Loosen X-axis motor screws
2. Push the motor inward to loosen the belt
3. Push out the metal ends of the belt
4. Take out the X-axis belt
5. Insert the new belt through underneath the pulley wheel.
6. Circle it around the idler pulley
7. Buckle the metal ends into the slots.
8. Pull the motor outward to tighten the belt and secure the mounting screws.
9. Move the print head to check the smoothness and stability.
10. Power on the printer and input X-axis and Y-axis movement command to check smoothness and stability.