March 8, 2020 Anet 3D

ET4's Newest Firmware Update 1.1.5 Has Released Now!

How are you doing guys? Anet ET4 was upgraded agaaaaaaain~
Yes, today We'll push the newest ET4 firmware update - Version 1.1.5 
So now let's check together, what are the new functions it has prepared for us!

* Get firmware lists of Anet ET4 and ET5 printers. 


Caution:

1. Format your SD card or change a high-quality one before updating!
2. This firmware version only supports ET4 3D printer without capacitive leveling sensor. 
3. Users are forbidden to use this firmware to update ET4 Pro, ET4X, ET5,or any other model.
P.S:
The main marker, except the nameplate attached to the left side of machines, to distinguish between ET4 and ET4 Pro is to identify their printerheads' appearance. You can have a clear impression of them from the two pics below. 
 
                ET4's Printerhead                               ET4 Pro's Printerhead
Download link below!
https://drive.google.com/openid=12kKfnfOz6147Iju0Xl2YqgN1gBn9WV1n

First, yeah, it has once for all solved this nerve-wracking issue - SD card cannot be plugged off when the machine is operating. Now, we 'll say goodbye to it!

Second, we have optimized the leveling compensation process, yes, an absolutely simplified automatic leveling function has come out. In addition, some users reflected that their homing ET4 without leveling when using it first time would get its extruder stuck. Now this problem will never emerge again with updating our newest firmware

Third, some bugs in the firmware that would brisk the machine after updating have been repaired. We believe a safer updating will be ensured 

What are you waiting for? Just update the firmware now, the new firmware will go on providing you with a better experience! But, yeah, we still have the responsibility to provide assistance to those who might brick our ET4(though there's only a slight possibility). So in case, you should check out this:
ANET ET4 FIRMWARE UPDATING GUIDELINES
Filed in: 3D Printer Related, Anet, Anet 3D Printers, Anet ET4, Anet Tech, ET Series, ET4, FAQ, Firmware, Update
Previous article A gift for Apple Watch Users
Next article Anet ET4 Firmware Updating Guidelines

Comments

souza - April 2, 2020

I updated to the latest firmware (1.1.5) and now power loss recovery (resume)does not work. Would anyone have a solution? Thanks

aguia - April 2, 2020

Eu atualizei tudo certo com as correções, porém a função resume não funciona mais!

Ralph - March 31, 2020

Since your fù*ùing update my nozzle temp won’t go up (well just once, then it drop and nothing) I’m stuck !!!

Junior - March 30, 2020

I updated to the latest firmware (1.1.5) and now power loss recovery does not work. Would anyone have a solution? Thanks

stuart - March 29, 2020

updated to latest firmware and now the power loss recovery doesnt work. is there any way to go back to version 1.1.2 or the stock firmware the printer came with

rodolfo - March 25, 2020

após a atualização da nova versão a impressora está 100% funcionando.
os problemas de nivelamento automático e o travamento do cartão sd acabou
se alguém tiver algum problema de travar a impressora após atualização entre neste site. https://www.cnx-software.com/2020/02/04/how-to-recover-from-a-bad-firmware-upgrade-on-anet-et4-3d-printer/

rodolfo - March 25, 2020

após a atualização da nova versão a impressora está 100% funcionando.
os problemas de nivelamento automático e o travamento do cartão sd acabou
se alguém tiver algum problema de travar a impressora após atualização entre neste site. https://www.cnx-software.com/2020/02/04/how-to-recover-from-a-bad-firmware-upgrade-on-anet-et4-3d-printer/

Josh C - March 21, 2020

tried to update firmware and it bricked machine and stuck on ANET logo. Is there anything to try different next time?

John Arts - March 20, 2020

I have a et4p when i update the firmware every thing goes ok
But when i check after updating firmware is stil 112

Leave a comment

Comments must be approved before appearing

* Required fields