Extruder Head Kits for Anet ET4 / ET5 3D Printer - Anet 3D Printer
Extruder Head Kits for Anet ET4 / ET5 3D Printer - Anet 3D Printer

Extruder Head Kits for Anet ET4 / ET5 3D Printer

$38.00
Applicable

3D printer extruder head for Anet ET4, ET4X, ET4 Pro, ET5, ET5X or ET5 Pro 3D printers. The nozzle is 0.4mm standard one that suitable for printing 1.75mm filament. The kit includes Hot End Kit with nozzle / thermistor / cartridge heater, pulley assembly and fans, etc.

  

Specifications:

Nozzle: brass / MK8 / 0.4mm

Throat Tube: stainless steel / 1.75mm inside diameter

Heating Block: aluminum / 20*20*10mm

Thermistor: NTC 3950 / 100K Ohm

Fan: 40*40mm / DC 24V 0.09A

 

Shipping from the Chinese warehouse.

The picture is for reference only. Please adhere to the original products in case of any mistake.

  

PS: You may also need Adapter Board for ET4 / ET4 Pro / ET5

Related products

  • Mainboard for Anet ET4/ET4 Pro/ET5 3D Printer - Anet 3D Printer
    Mainboard for Anet ET4/ET4 Pro/ET5 3D Printer - Anet 3D Printer
    from $69.00

    Mainboard for Anet ET4/ET4 Pro/ET5 3D Printer

    Motherboard Mainboard for Anet ET4X / ET4 / ET4 Pro / ET5X / ET5 / ET5 Pro Printer. · The 32 bit high-speed ARM chip is used as the main control ch...

    View full details
  • 0.2mm/ 0.3mm/ 0.4mm/ 0.5mm/ 0.6mm Extruder Nozzles - Anet 3D Printer
    0.2mm/ 0.3mm/ 0.4mm/ 0.5mm/ 0.6mm Extruder Nozzles - Anet 3D Printer
    Sale
    from $9.00

    15pcs Brass 3D Printer Nozzle

    15PCS brass nozzles for 3D printer MK8 extruder head with filament diameter of 1.75 / 3.0mm. Compatible with mainstream printers such as Anet, Crea...

    View full details
  • Aluminum Heat Bed for ET4 / ET5 / A8 / A6 / E12 / E16 / A8 Plus /A3 - Anet 3D Printer
    Aluminum Heat Bed for ET4 / ET5 / A8 / A6 / E12 / E16 / A8 Plus /A3 - Anet 3D Printer
    Sale
    from $25.00

    Heat Bed for Anet ET4 / ET5 / A8 / A6 / E12 / E16 / A8 Plus

    24V 220*220*3mm aluminum heat bed for ET4 / ET4X / ET4 Pro. 24V 300*300*3mm aluminum hotbed for Anet ET5X / ET5 / ET5 Pro. 12V 220*220*3mm alumin...

    View full details
  • Pneumatic Connector for ET4 Series Printers - Anet 3D Printer
    Pneumatic Connector for ET4 Series Printers - Anet 3D Printer
    Sold out
    $15.00
    $14.99

    15pcs Pneumatic Connector

    PC4-M6 pneumatic straight fitting connector for MK8 OD 4mm PTFE tube for M6 Feed Fitting Coupler Anet ET4 / ET4X / ET4 Pro, and Anet ET5 / ET5X / E...

    View full details
  • 3PCS Hot End Kit for A8 / ET4 3D Printers
    Anet Hot End Kit for A8 3D Printer - Anet 3D Printer
    Sale
    from $15.00

    3PCS Hot End Kit for A8 / ET4 3D Printers

    Hot end kit for Anet A8, A8 Plus, A6, Anet ET4, Anet ET5X, Anet ET5, ET5 Pro 3D printers suits 1.75mm filament printing. It’s also a replacement pa...

    View full details

The print heads of Anet ET4 and ET5 series 3D printers are preassembled parts. Watch this tutorial video and learn fast replacing a new print head for the printer in a few steps.
1. Remove cable zip ties on wires of the old print head.
2. Unplug wirings on the circuit board.
3. Pull out the teflon tube by pressing the black part pneumatic coupler and pull out the teflon tube. 
4. Buckle off the belt, then pull the extruder kit out of the x-axis.
5. Put new print head on.
7. Insert the x-axis belt underneath the pulley of the extruder head.
8. Loosen x-axis motor mounting screws, and move the motor inwards.
9. Circle the belt around the gear. Buckle the belt.
10. Move the motor outward to tighten the belt. Tighten x-axis motor screws.
11. Plug in Teflon tube.
12. Plug in all wiring on the adapter board.
13. Fasten the wiring with zip tie.